• Air Termination Rods & Acccessories

    Air termination rods are made of pure copper. The rods are made with a tapered tip and is always installed on the top portion of the facility to be protected. Air termination rods arrest or attract the lightning strike and guide the energy to ground. Air terminaton rods are fixed on the building with the help of a base.

    SIZE
    Rod Length
    MATERIAL PART NO
    15 x 300mm Copper EXTPR-15-0.3
    15 x 500mm Copper EXTPR-15-0.5
    15 x 1000mm Copper EXTPR-15-1.0
    15 x 1500mm Copper EXTPR-15-1.5
    15 x 2000mm Copper EXTPR-15-2.0


  • Air Terminal Base

    Air terminal base, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the base.

    SIZE MATERIAL PART NO
    16mm Gunmetal EXATB-16
    20mm Gunmetal EXATB-20


  • Multiple Point

    Multiple points are made of copper. The multiple points are fitted with air termination rods. Multiple point with spikes give additional lightning arresting capability to the network.

    SIZE MATERIAL PART NO
    16mm Copper EXMP-16


  • Flat Saddle

    Flat saddle, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the saddle.

    SIZE MATERIAL PART NO
    16mm Gunmetal EXFS-16
    20mm Gunmetal EXFS-20
    Flat Saddle Equipment


  • Ridge Saddle

    Ridge saddle, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the saddle.

    SIZE MATERIAL PART NO
    8mm Gunmetal EXRS-08
    Ridge Saddle Equipment